KAM Bling Heavy Duty Hubs

These new KAM HD driving member hubs have 10 bolt holes and are made out of the same material as our crown wheel and pinions. They have 10 bolt holes so that they will fit both metric and imperial axles.  i.e.; they have different pdc to fit the 2 types.

They fit standard to the narrow type hub, if you what to fit them to a wide type hub then you just have to purchase a spacer.  This makes the hub more flexible and if you have to change your axle then it is more cost effective than our competitors.

New Caps with engraved LOGO                 KAM wide hub spacer

The 5 holes that are not used are filed with plugs.  The design is covered by a worldwide Patents office design right.  The cap is screw on and is the same size is the hub retaining nut so you can use the same tool to remove if required.

Material
These new version are made from EN36 and are 61 Rockwell hardness

The image below shows the two standard hubs.

Standared Part No: 

Narrow type ruc105200 

Wide type: FRC5806 

KAM HD Hub fitted to MOD axle